Sarwinplast-HD-MR : Super White High Density Moisture Resistant Gypsum Plaster : Sarwin Gypsum Plaster is a High-density light weight Polymerised gypsum plaster suitable for application on most internal surfaces including brick, block and concrete. It consists of superior quality high density gypsum, formulated with special additives to enhance working and setting characteristics, also improves workability and coverage. When dry, it provides superior whiteness, hard, smooth finish and is suitable for all internal dry plastering applications.
Benefits
Faster setting than the conventional sand cement plaster
Reduce structural load on building as it is 50% lighter than sand cement plaste
Direct application on Bricks, Blocks, RCC & sand cement surface
No water curing required Compatible with all types of paints & decorative range
Clean loose particles, dirt, grease and traces of adhering material from the wall surface with the help of sand paper, putty blade or by wire brush.
Pre-wet the surface before application to achieve good workability and higher coverage.
PERFORMANCE:
Increases mechanical strength
Providing greater adhesion to tile edges, and glass mosaics, especially for Roof Cooling Tiles and Bathroom Tiles
Providing greater abrasion resistance
Increased flexural strength and flexibility
Enabling Gypsum to be used where limited movement/vibration is anticipated e.g. plasterboard and timber floors
Reduced water permeability
Providing greater protection to water-sensitive backgrounds and minimizing the risk of efflorescence
TIPS:
Once the mix has begun to set, additional dry material should not be added, as performance properties of plaster will get altered, thus affecting workability, cohesiveness, adhesion and strength.
A single coat should not exceed more than 8 mm to 10 mm of thickness. If at all thickness required is more than 8 mm to 10 mm, then plaster needs to be applied in multiple coats.
Use the material instantly after mixing
Sarwin gypsum plaster should not be applied on surface which is subjected continuous seepage or dampness
CAUTION:
Do not use hook
Store in a cool dry place
Increase of contact with eyes for open wound rings out quickly with fresh water
Benefits
Faster setting than the conventional sand cement plaster
Reduce structural load on building as it is 50% lighter than sand cement plaste
Direct application on Bricks, Blocks, RCC & sand cement surface No water curing required Compatible with all types of paints & decorative range
Low consumption of paint
Reviews
There are no reviews yet.
Be the first to review “HD MR Gypsum Plaster” Cancel reply
Reviews
There are no reviews yet.